E-posta biçimi hatası
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
Product introduction:
Carbon steel check valves are installed to prevent one medium from flowing to another. They can be installed as an integral part of the control system or used as an integral part of the piping system. The check valve is a fail safe device. When a certain pressure or force acts on it, it can automatically close the flow. Carbon steel check valves are used in piping systems to open or close the flow direction. They are designed as valve covers with springs. When the fluid passes through the valve, it will remain open, and when the fluid pressure disappears, it will close.
Check valve is a device to prevent unnecessary flow of fluid in the system. Most commonly, check valves are used to manually control the flow conditions in the fluid system according to the flow direction of the fluid. Check valves in liquid applications are sometimes referred to as gate valves. In gas applications, check valves are sometimes called butterfly valves or drum valves because of their typical valve design or operating characteristics. Check valves also appear in industrial ventilation applications (drainage).
Product advantages:
Carbon steel check valves have chemical resistance and corrosion resistance, especially for ammonia, chlorine, caustic soda and other types of corrosive chemicals. This check valve also has a high burst pressure, so it is very suitable for applications with a large number of debris or heavy liquids. The product is made of low carbon steel and carbon steel. This material provides strength and flexibility. They are ideal for high and low pressure applications. The cylinder body of this check valve is made of carbon steel, which is characterized by high tensile strength, ductility and excellent wear resistance.
Carbon steel check valves can be used as safety check valves in various industries, such as oil and gas, chemical industry, water treatment and power generation. In addition to reliable performance in a variety of applications, our products are also highly durable and easy to install. They have excellent particle resistance and prolong the service life of the product. High quality, durable, no regular maintenance. The heavy-duty structure is suitable for all types of industrial environments. Due to its compact structure, easy installation and service, there is no pressure drop in the whole working range, and the flow performance is uniform.
Product design:
These check valves are designed for pneumatic service and are equipped with standard rolling diaphragm design to maintain fluid tightness. Carbon steel valve body material is vacuum injection molded. The valve stem is designed as a whole, using an integrated valve stem tube. This provides a harder stem without fatigue due to long-term vibration or shock loads.
Cast Steel Check Valve
Swing check valve, Bolted cover. Renewable disc and seat (in S.S. construction, integral seat non renewable).
Cast Steel Check Valves are used to prevent the back flow of fluid by closing before flow reversal, thereby preventing slam and water hammer. Relia Cast Steel Check Valves have been successfully installed in clean and dirty applications including petrochemical, water treatment, industrial water and wastewater services.
Cast Steel Check Valves are offered in swing check & piston check styles.
Standard Specifications
Design |
BS 1868/API 6D/ASME B16.34 |
Face to face |
ANSI B16.10 |
End flange |
ASME B16.5/16.47 |
BW Ends |
ASME B16.25 |
Test |
API 598 |
Material |
Nace Mr-0175 |
Cast Steel Swing Check Valve Drawing
Briefly said, a check valve is a protection device that prevents the fluid from flowing in an unwanted direction within the piping system or the pipeline (as backflows may damage upstream equipment).
How does a check valve work?
The valve lets the fluid flow in the desired direction only (if there is enough pressure), and blocks any flow in the opposite direction. Also, the valve closes automatically when the pressure drops. It is therefore critical that the valve is installed with a proper orientation!
Note that this type of valve accomplishes its scope without external forces or actuation. This is a key difference vs. gate or globe valves, that need an external force to work (level, wheel, gear or actuator).
Standard Material
Item |
Part Name |
Material |
1 |
Body |
A216 WCB |
2 |
Seat Ring |
A105+STL |
3 |
Disc |
WCB+13Cr |
4 |
Disc Washer |
A276 410 |
5 |
Disc Nut Pin |
Stainless Steel |
6 |
Disc Nut |
Stainless Steel |
7 |
Hinge Pin |
A216 WCB |
8 |
Hinge Pin |
A182 F6a |
9 |
Bearing Bracket |
A216 WCB |
10 |
Spring Washer |
Carbon Steel |
11 |
Hex Bolt |
Carbon Steel |
12 |
Gasket |
SS304+Graphite |
13 |
Cover Bolt |
A193 B7 |
14 |
Nut |
A194 2H |
15 |
Cover |
A216 WCB |
16 |
Eye Bolt |
Carbon Steel |
17 |
Plug |
Carbon Steel |
[caption id="attachment_3621" align="alignnone" width="500"]